Minelab The Sovereign Uživatelský manuál stáhnout pdf (Strana 10)

Discrimination Controls

There are two discriminator controls on the Sovereign. A Disc control

knob and a Notch control knob. There also is a switch that allows you to

select between the disc or pinpoint modes. The Excalibur has the same

controls as the Sovereign with the exception that it does not have a Notch

control.

The Disc and Notch controls only function while in the discriminate

mode. The discriminate mode will always reject ferrous objects and will

always accept the U.S. 1¢, 10¢, 25¢, 50¢ and dollar coins. Always set

your discrimination based on what you want to find. You can look at it as

what you’re willing to leave in the ground. If you want to find gold rings

you must dig almost everything because any gold ring that has a

conductivity equal to any reject level setting will also be rejected, for that

ring will fall in that reject range.

The Disc control has 17 graduations and as it is turned clockwise targets

of higher conductivity will be rejected. All the way counterclockwise

will be one and fully clockwise will be number seventeen.

The Notch control will reject a range of one setting. One setting is the

space between two graduations. Example, if you set the Notch control to

the position 6, targets whose conductivity falls between position 5 and

position 6 will be rejected. It might also be noted that the discrimination

range of the Notch control can vary slightly from detector to detector.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Žádné komentáře

Minelab The Sovereign Uživatelský manuál Strana 10