Minelab The Sovereign Uživatelský manuál Strana 13

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 34
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 12
13
Advanced Tuning
We recommend that new users learn the basics of their machine before attempting to
use the advanced tuning techniques.
Set the Disc and Notch controls to your desired settings.
Set the all-metal/discriminate switch to all-metal. Pinpoint on the Excalibur.
Turn the Volume control all the way clockwise.
Set the Threshold control to a slight hum.
Slowly sweep the search coil on the ground, side to side, while keeping the
searchcoil as close to the ground as possible.
Find a patch of ground with no metal in it that is large enough to sweep your coil
without hearing a metal target.
Place the coil on the ground and hold the coil still.
Switch the all-metal/discriminate switch to discriminate. Disc on the Excalibur.
Turn the sensitivity control all the way clockwise.
While slowly sweeping the coil over the ground previously checked for no metal,
turn the sensitivity control as far counter-clockwise as possible, without going
into “Auto”, until falsing occurs.
While continuing to sweep slowly, turn the sensitivity control back slightly
clockwise to eliminate the falsing.
To the best of our knowledge, the above setting is about as close to maximum
sensitivity that you can set this machine .
If you don’t like the sweeping method, you can also find a metal free spot just the
size of the searchcoil. Hold the coil still and turn the sensitivity control just off of
Auto. If falsing occurs, turn the control clockwise until the falsing stops. Then turn
back slightly counter-clockwise for a positive setting.
Please note that when using the advanced tuning option, you are maximizing your
sensitivity for depth and some falsing may occur. If you have too much falsing or the
falsing is irritating, you can reduce your sensitivity slightly more to eliminate it.
The 20 rings in this frame are made of iron and, of course, registered as iron. They also read -495
to -497 on the SunRay DTI-II meter and gave a negative (silent) audio response. Just another
example of having to dig it all to get it all.
Zobrazit stránku 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Komentáře k této Příručce

Žádné komentáře